J-Link PLUS V11
This page contains the general, mechanical and electrical specifications as well as an overview of supported soft- and hardware features of the SEGGER J-Link PLUS V11.
For information on the general specifications as well as an overview of supported software features refer to J-Link PLUS.
The J-Link PLUS V11 has been superseded and as such is considered a legacy device.
This device is not eligible for support by SEGGER.
Refer to the J-Link Model Overview for a list of most recent devices by SEGGER.
We recommend to make use of the SEGGER Trade-In-Program to upgrade to the current version of the product.
When new features are added, articles for legacy models may not be updated.
Hardware Features
| Feature | Supported |
|---|---|
| USB 2.0 Full Speed | 
|
| USB 2.0 Hi-Speed |
|
| WinUSB |
|
| JTAG interface |
|
| cJTAG interface |
|
| cJTAG interface without/buggy KEEPER logic |
|
| SWD interface |
|
| SWO interface |
|
| SPI interface |
|
| QSPI interface | 
|
| Microchip ICSP interface |
|
| Renesas FINE interface |
|
| SiLabs C2 2-wire interface |
|
| ETB Trace ARM7/9 |
|
| ETB Trace Cortex-M |
|
| ETB Trace Cortex-A/R |
|
| ETM Trace Cortex-M |
|
| VCOM |
|
| Memory Stop mode support |
|
| Cortex-M Monitor Mode debugging |
|
| SWD Multi-Drop |
|
| CMSIS-DAP v1 (HID) mode |
|
Interface speeds
| Interface | Max. speed |
|---|---|
| VCOM | 115200 Bd [1] |
[1] The max. baudrate for J-Link depends on the configured Eco mode:
| Eco mode | Max. baudrate |
|---|---|
| Normal | 115200 Bd |
| Eco | 57600 Bd |
| Eco Plus | 28800 Bd |
| Eco Max | 28800 Bd |
Specifications
| Specification | Value |
|---|---|
| General | |
| Supported OS | Microsoft Windows (x86/x64), Linux (x86/x64/Arm), macOS (x86) |
| Electromagnetic compatibility (EMC) | EN 55022, EN 55024 |
| Operating temperature | +5°C ... +60°C |
| Storage temperature | -20°C ... +65 °C |
| Relative humidity (non-condensing) | Max. 90% rH |
| Mechanical | |
| Size (without cables) | 100mm x 53mm x 27mm |
| Weight (without cables) | 70g |
| Available interfaces | |
| USB interface | USB 2.0 (Hi-Speed); USB Type B |
| Target interface | JTAG 20-pin (14-pin and other adapters available) |
| JTAG/SWD Interface, Electrical | |
| Power supply | USB powered Max. 50mA + Target Supply current. |
| Target interface voltage (VIF) | 1.2V ... 5V |
| Target supply voltage | 5V (derived from USB voltage) |
| Target supply current | Max. 300mA |
| Reset Type | Open drain. Can be pulled low or tristated. |
| Reset low level output voltage (VOL) | VOL <= 10% of VIF |
| For the whole target voltage range (1.2V <= VIF <= 5V) | |
| LOW level input voltage (VIL) | VIL <= 40% of VIF |
| HIGH level input voltage (VIH) | VIH >= 60% of VIF |
| For 1.2V <= VIF <= 3.6V | |
| LOW level output voltage (VOL) with a load of 10 kOhm | VOL <= 20% of VIF |
| HIGH level output voltage (VOH) with a load of 10 kOhm | VOH >= 80% of VIF |
| For 3.6 <= VIF <= 5V | |
| LOW level output voltage (VOL) with a load of 10 kOhm | VOL <= 20% of VIF |
| HIGH level output voltage (VOH) with a load of 10 kOhm | VOH >= 80% of VIF |
| JTAG/SWD Interface, Timing | |
| Target interface speed | Max. 15 MHz |
| SWO sampling frequency | Max. 30 MHz |
| Data input rise time (Trdi) | Trdi <= 20ns |
| Data input fall time (Tfdi) | Tfdi <= 20ns |
| Data output rise time (Trdo) | Trdo <= 10ns |
| Data output fall time (Tfdo) | Tfdo <= 10ns |
| Clock rise time (Trc) | Trc <= 3ns |
| Clock fall time (Tfc) | Tfc <= 3ns |